:STATus:QUEStionable:CONDition

Description

This command returns the content of the questionable condition register.

Note

Reading the register has no effect on the content of the register.

Syntax Response
:STATus:QUEStionable:CONDition? <numeric>
Response value description
<numeric> value of the questionable condition register in range from 0 to 32767
Bit value Code Description
Bit 0 - 1 VOLTage The quality of the voltage measurement can not be guaranteed. This bit is set when an overload was detected during measurement.
Bit 1 - 2 CURRent This bit is not used.
Bit 2 - 4 TIME This bit is not used.
Bit 3 - 8 POWer This bit is not used.
Bit 4 - 16 TEMPerature This bit is not used.
Bit 5 - 32 FREQuency This bit is not used.
Bit 6 - 64 PHASe This bit is not used.
Bit 7 - 128 MODulation This bit is not used.
Bit 8 - 256 CALIbration The quality of the calibration can not be guaranteed. This bit is set when the frequency range of an active full range calibration is not covering the frequency range of a performed measurement.
Bit 9 - 512 Not used This bit is not used.
Bit 10 - 1024 Not used This bit is not used.
Bit 11 - 2048 Not used This bit is not used.
Bit 12 - 4096 Not used This bit is not used.
Bit 13 - 8192 INSTrument Summary A summary of the instruments register.
Bit 14 - 16384 Command Warning This bit is not used.
Bit 15 - 32768 Not used The usage of the most significant bit is not allowed since some controllers may have difficulty reading a 16 bit unsigned integer.

Sample usage

Input:

var visaSession = new TcpipSocket(VISA_RESOURCENAME);
visaSession.RawIO.Write(":STAT:QUES:COND?\n");
Console.WriteLine(visaSession.RawIO.ReadString());

:STATus:QUEStionable[:EVENt]?

:STATus:QUEStionable:ENABle

:STATus:QUEStionable:NTRansition

:STATus:QUEStionable:PTRansition

References

The status registering model of a SCPI device