:SENSe:CORRection:SDELaytime

Description

Gets or sets the delay time when performing the short calibration.

Note

The short delay time can only be set, if the selected measurement mode supports a short calibration. Otherwise a Settings Conflict error is raised.

• Command
• Query

Syntax	Parameter
:SENSe<ch>:CORRection:SDELaytime	<numeric>

Parameters	accepted format	allowed suffixes	possible Errors	description
<ch>	{ 1 | empty }	none	Invalid channel index	Currently only one channel is supported. Empty means 1 is used as default.
{ <numeric> | MINimum | MAXimum }	Range from 0s to 500μs	s - Seconds	Settings conflict	The short delay time in seconds.

Sample usage

Configure an S11 measurement, set the short delay time to 50ps and perform the full range short calibration.

• C#
• Python

var visaSession = new TcpipSocket(VISA_RESOURCENAME);
visaSession.RawIO.Write(":CALC:PAR:DEF S11\n");
visaSession.RawIO.Write(":SENS:CORR:SDEL 50ps\n");
visaSession.RawIO.Write(":SENS:CORR:FULL:SHOR\n");
visaSession.RawIO.Write("*OPC?*\n");
visaSession.RawIO.ReadString();

Related commands in the Automation Interface

ShortDelayTime