:SENSe:CORRection:FULLrange:AVAIlable

Description

Gets a value indicating whether the actual full range calibration is available or not. If the calibration is available, all necessary calibration measurements have been performed and the calibration data has been calculated.

For more information about the calibration system please refer to Calibration.

Syntax Response
:SENSe<ch>:CORRection:FULLrange:AVAIlable? { 1 | 0 }
Parameters accepted format description
<ch> { 1 | empty } Currently only one channel is supported. Empty means 1 is used as default.
Response value description
{ 1 | 0 } Boolean value indicating whether the Full Range Calibration is available or not.

Options

Options Description
OFF | 0 Full Range Calibration is not available.
ON | 1 Full Range Calibration is available.

Presets

default value
{ 1 | 0 } 0

Sample usage

Perform a Full Range Gain Calibration and check whether it is available.

var visaSession = new TcpipSocket(VISA_RESOURCENAME);
visaSession.RawIO.Write(":CALC:PAR:DEF S21\n");
visaSession.RawIO.Write(":SENS:CORR:FULL:THRU\n");
visaSession.RawIO.Write("*WAI\n"); // wait for the calibration to finish
visaSession.RawIO.Write(":SENS:CORR:FULL:AVAI?\n");
visaSession.RawIO.ReadString();

:SENSe:CORRection:FULLrange:ACTive

:SENSe:CORRection:FULLrange:ENABle

:SENSe:CORRection:USERrange:ACTive

:SENSe:CORRection:USERrange:AVAIlable

:SENSe:CORRection:USERrange:ENABle

IsAvailable (Gain)

IsAvailable (Impedance)

IsAvailable (Mulimode)