:SENSe:CORRection:FULLrange:MULTimode

Description

This command toggles the wanted calibration mode, if the measurement type supports multiple calibration types.

Note

This is only allowed, if the selected measurement type supports multimode calibrations, otherwise a Settings Conflict Error is raised.

For more information about the calibration system please refer to Calibration.

Syntax Parameter
:SENSe<ch>:CORRection:FULLrange:MULTimode { IMPedance | GAIN | NOcalibration }
Parameters accepted format allowed suffixes possible Errors description
<ch> { 1 | empty } none Invalid channel index Currently only one channel is supported. Empty means 1 is used as default.
{ IMPedance | GAIN | NOcalibration } exactly the given options none Illegal parameter value The selected calibration type.

Options

Options Description
GAIN The gain calibration (thru) is selected.
IMPedance The impedance calibration (open / short / load) is selected.
NOcalibration No calibration is selected.

Presets

default value
{ IMPedance | GAIN | NOcalibration } NO

Sample usage

Execute open, short, thru and load calibration and set the type to impedance calibration (full range).

var visaSession = new TcpipSocket(VISA_RESOURCENAME);
visaSession.RawIO.Write(":CALC:PAR:DEF Z\n");
visaSession.RawIO.Write(":SENS:Z:METH TSH\n");
visaSession.RawIO.Write(":SENS:CORR:FULL:OPEN\n");
visaSession.RawIO.Write("*OPC?\n"); // wait for the calibration to finish
visaSession.RawIO.ReadString();
visaSession.RawIO.Write(":SENS:CORR:FULL:SHORT\n");
visaSession.RawIO.Write("*OPC?\n"); // wait for the calibration to finish
visaSession.RawIO.ReadString();
visaSession.RawIO.Write(":SENS:CORR:FULL:LOAD\n");
visaSession.RawIO.Write("*OPC?\n"); // wait for the calibration to finish
visaSession.RawIO.ReadString();
visaSession.RawIO.Write(":SENS:CORR:FULL:THRU\n");
visaSession.RawIO.Write("*OPC?\n"); // wait for the calibration to finish
visaSession.RawIO.ReadString();
visaSession.RawIO.Write(":SENS:CORR:FULL:MULT IMP\n");

:SENSe:CORRection:USERrange:MULTimode

SetCalibrationType(CalibrationMultiModeToggle)