:SENSe:CORRection:USERrange:LOAD[:EXEcute]

Description

Executes the LOAD calibration over the range configured by the user. If all the necessary calibration measurements have been performed on completion of this command, the calibration data is calculated and the calibration is enabled automatically.

Note

The calibration may take some time. Therefore the command is implemented as overlapped command and can be awaited.

Important

The load calibration is only performable with the right measurement settings, otherwise a Settings Conflict Error is raised. E.g. it is not valid to perform a load calibration if the selected measurement mode is set to Gain - measurement.

For more information about the calibration system please refer to Calibration.

Syntax Parameter
:SENSe<ch>:CORRection:USERrange:LOAD[:EXEcute] none
Parameters accepted format allowed suffixes possible Errors description
<ch> { 1 | empty } none Invalid channel index Currently only one channel is supported. Empty means 1 is used as default.
none none none Settings Conflict - -221 none

Sample usage

Perform a Load User Range Calibration and wait for its completion.

var visaSession = new TcpipSocket(VISA_RESOURCENAME);
visaSession.RawIO.Write(":CALC:PAR:DEF Z\n");
visaSession.RawIO.Write(":SENS:Z:METH TSER\n");
visaSession.RawIO.Write(":SENS:CORR:USER:LOAD\n");
visaSession.RawIO.Write("*WAI\n");

:SENSe:CORRection:FULLrange:LOAD[:EXECUTE]

:SENSe:CORRection:FULLrange:OPEN[:EXECUTE]

:SENSe:CORRection:FULLrange:SHORt[:EXECUTE]

:SENSe:CORRection:FULLrange:THRU[:EXECUTE]

:SENSe:CORRection:USERrange:OPEN[:EXECUTE]

:SENSe:CORRection:USERrange:SHORt[:EXECUTE]

:SENSe:CORRection:USERrange:THRU[:EXECUTE]

ExecuteLoad() (Impedance)

ExecuteLoad() (MultiMode)