• General
  • API Documentation
  • SCPI
    • General
    • Command Reference
    • Starting Server

    Show / Hide Table of Contents
    • General commands
      • :ABORt
      • *CLS
      • *ESE
      • *ESR
      • *IDN
      • *OPC
      • *OPC?
      • *RST
      • *SRE
      • *STB
      • *TRG
      • *TST
      • *WAI
    • Calculate subsystem
      • :CALCulate:PARameter:DEFine
      • :CALCulate[:SELected]:DATA:SDATa
      • :CALCulate[:SELected]:FORMat
      • :CALCulate[:SELected]:ZPARameter:DEFine
    • Format subsystem
      • :FORMat[:DATA]
    • Initiate subsystem
      • :INITiate[:IMMediate]
      • :INITiate:CONTinuous
    • Input subsystem
      • :INPut:ATTenuation:CH1
      • :INPut:ATTenuation:CH2
      • :INPut:ATTenuation:R
      • :INPut:ATTenuation:T
      • :INPut:GAIN:CH1
      • :INPut:GAIN:CH2
      • :INPut:GAIN:R
      • :INPut:GAIN:T
      • :INPut:IMPedance:CH1
      • :INPut:IMPedance:CH2
      • :INPut:IMPedance:R
      • :INPut:IMPedance:T
    • Mass Memory subsystem
      • :MMEMory:STORe:CORRection
      • :MMEMory:LOAD:CORRection:FULLrange
      • :MMEMory:LOAD:CORRection:USERrange
    • Output subsystem
      • :OUTPut:AOFF
    • Sense subsystem
      • :SENSe:AVERage[:STATe]
      • :SENSe:AVERage:CLEar
      • :SENSe:AVERage:COUNt
      • :SENSe:BANDwidth[:RESolution]
      • :SENSe:BWIDth[:RESolution]
      • :SENSe:CORRection:FULLrange:ACTive
      • :SENSe:CORRection:FULLrange:AVAIlable
      • :SENSe:CORRection:FULLrange:ENABle
      • :SENSe:CORRection:FULLrange:EXTPolated
      • :SENSe:CORRection:FULLrange:MULTimode
      • :SENSe:CORRection:FULLrange:LOAD[:EXEcute]
      • :SENSe:CORRection:FULLrange:OPEN[:EXEcute]
      • :SENSe:CORRection:FULLrange:SHORt[:EXEcute]
      • :SENSe:CORRection:FULLrange:THRU[:EXEcute]
      • :SENSe:CORRection:IMPedance[:INPut][:MAGNitude]
      • :SENSe:CORRection:LOAD
      • :SENSe:CORRection:SDELaytime
      • :SENSe:CORRection:USERrange:ACTive
      • :SENSe:CORRection:USERrange:AVAIlable
      • :SENSe:CORRection:USERrange:ENABle
      • :SENSe:CORRection:USERrange:MULTimode
      • :SENSe:CORRection:USERrange:LOAD[:EXEcute]
      • :SENSe:CORRection:USERrange:OPEN[:EXEcute]
      • :SENSe:CORRection:USERrange:SHORt[:EXEcute]
      • :SENSe:CORRection:USERrange:THRU[:EXEcute]
      • :SENSe:FREQuency:CENTer
      • :SENSe:FREQuency:DATA
      • :SENSe:FREQuency:SPAN
      • :SENSe:FREQuency:STARt
      • :SENSe:FREQuency:STOP
      • :SENSe:SWEep:DWELl
      • :SENSe:SWEep:POINts
      • :SENSe:SWEep:TIME[:DATA]?
      • :SENSe:SWEep:TYPE
      • :SENSe:Z:METHod
    • Service subsystem
      • :SERVice:SWEep:FREQuency:MAXimum
      • :SERVice:SWEep:FREQuency:MINimum
    • Source subsystem
      • :SOURce:POWer[:LEVel][:IMMediate][:AMPLitude]
    • Status subsystem
      • :STATus:OPERation[:EVENt]
      • :STATus:OPERation:CONDition
      • :STATus:OPERation:ENABle
      • :STATus:OPERation:NTRansition
      • :STATus:OPERation:PTRansition
      • :STATus:PRESet
      • :STATus:QUEStionable[:EVENt]
      • :STATus:QUEStionable:CONDition
      • :STATus:QUEStionable:ENABle
      • :STATus:QUEStionable:NTRansition
      • :STATus:QUEStionable:PTRansition
    • System subsystem
      • :SYSTem:ERRor[:NEXT]
      • :SYSTem:ERRor:COUNt
      • :SYSTem:PRESet
      • :SYSTem:VERSion
    • Trigger subsystem
      • :TRIGger[:SEQuence][:IMMediate]
      • :TRIGger[:SEQuence]:SINGle
      • :TRIGger[:SEQuence]:SOURce

    :STATus:QUEStionable:NTRansition

    Description

    Gets or sets the value of the negative transition filter register. Setting a bit in the negative transition filter register causes a 1 to 0 transition of the corresponding questionable condition register bit to set the associated bit in the questionable event register.

    Note

    Reading the register has no effect on the content of the register.

    • Command
    • Query
    Syntax Parameter
    :STATus:QUEStionable:NTRansition <numeric>
    Parameters accepted format possible Errors
    <numeric> Range from 0 to 65535 OutOfRangeError
    Syntax Response
    :STATus:QUEStionable:NTRansition? <numeric>
    Response value description
    <numeric> value of the questionable negative transition filter register in range from 0 to 32767 (the most significant bit shall not be used)

    Bit value code description
    Bit 0 - 1 VOLTage The quality of the voltage measurement can not be guaranteed.
    Bit 1 - 2 CURRent The quality of the current measurement can not be guaranteed.
    Bit 2 - 4 TIME The quality of the time measurement can not be guaranteed.
    Bit 3 - 8 POWer The quality of the power measurement can not be guaranteed.
    Bit 4 - 16 TEMPerature The quality of the temperature measurement can not be guaranteed.
    Bit 5 - 32 FREQuency The quality of the frequency measurement can not be guaranteed.
    Bit 6 - 64 PHASe The quality of the phase measurement can not be guaranteed.
    Bit 7 - 128 MODulation The quality of the modulation can not be guaranteed.
    Bit 8 - 256 CALIbration The quality of the calibration can not be guaranteed.
    Bit 9 - 512 Not used This bit is not used.
    Bit 10 - 1024 Not used This bit is not used.
    Bit 11 - 2048 Not used This bit is not used.
    Bit 12 - 4096 Not used This bit is not used.
    Bit 13 - 8192 INSTrument Summary A summary of the instruments register.
    Bit 14 - 16384 Command Warning Not used by now.
    Bit 15 - 32768 Not used The usage of the most significant bit is not allowed since some controllers may have difficulty reading a 16 bit unsigned integer.

    Sample usage

    Enable all negative transitions to be reported in the associated questionable event register.

    • C#
    • Python

    Input:

    var visaSession = new TcpipSocket(VISA_RESOURCENAME);
    visaSession.RawIO.Write(":STAT:QUES:NTR 65535\n");
    

    Input:

    response = visaSession.query(':STAT:QUES:NTR 65535\n')
    

    Related commands

    :QUEStionable[:EVENt]?

    :QUEStionable:ENABle

    :QUEStionable:CONDition

    :QUEStionable:PTRansition

    References

    The status registering model of a SCPI device

    Back to top Generated by DocFX