:SENSe:CORRection:USERrange:ACTive

Description

Gets a value indicating whether the actual user range calibration is active or not. If the calibration is active, its calculated values are used to correct the measurement data.

For more information about the calibration system please refer to Calibration.

Syntax Response
:SENSe<ch>:CORRection:USERrange:ACTive? { 1 | 0 }
Parameters accepted format description
<ch> { 1 | empty } Currently only one channel is supported. Empty means 1 is used as default.
Response value description
{ 1 | 0 } Boolean value indicating whether the User Range Calibration is active or inactive.

Options

Options Description
OFF | 0 User Range Calibration is inactive.
ON | 1 User Range Calibration is active.

Sample usage

Perform a User Range Gain Calibration and check whether it has been activated.

var visaSession = new TcpipSocket(VISA_RESOURCENAME);
visaSession.RawIO.Write(":CALC:PAR:DEF S21\n");
visaSession.RawIO.Write(":SENS:CORR:USER:THRU\n");
visaSession.RawIO.Write("*WAI\n"); // wait for the calibration to finish
visaSession.RawIO.Write(":SENS:CORR:USER:ACT?\n");
visaSession.RawIO.ReadString();

:SENSe:CORRection:FULLrange:ACTive

:SENSe:CORRection:FULLrange:AVAIlable

:SENSe:CORRection:FULLrange:ENABle

:SENSe:CORRection:USERrange:AVAIlable

:SENSe:CORRection:USERrange:ENABle

IsActive (Gain)

IsActive (Impedance)

IsActive (Mulimode)