:SENSe:CORRection:FULLrange:OPEN[:EXEcute]

Description

Executes the OPEN calibration over the full range. If all the necessary calibration measurements have been performed on completion of this command, the calibration data is calculated and the calibration is enabled automatically.

Note

The calibration may take some time. Therefore, the command is implemented as overlapped command and can be awaited.

Important

The open calibration is only performable with the right measurement settings, otherwise a Settings Conflict Error is raised. E.g. it is not valid to perform an open calibration if the selected measurement mode is set to Gain - measurement.

For more information about the calibration system please refer to Calibration.

Syntax Parameter
:SENSe<ch>:CORRection:FULLrange:OPEN[:EXEcute] none
Parameters accepted format allowed suffixes possible Errors description
<ch> { 1 | empty } none Undefined header Currently only one channel is supported. Empty means 1 is used as default.
none none none Settings Conflict - -221 none

Sample usage

Perform an Open Full Range Calibration and wait for its completion.

var visaSession = new TcpipSocket(VISA_RESOURCENAME);
visaSession.RawIO.Write(":CALC:PAR:DEF Z\n");
visaSession.RawIO.Write(":SENS:Z:METH TSER\n");
visaSession.RawIO.Write(":SENS:CORR:FULL:OPEN\n");
visaSession.RawIO.Write("*WAI\n");

:SENSe:CORRection:FULLrange:LOAD[:EXECUTE]

:SENSe:CORRection:FULLrange:SHORt[:EXECUTE]

:SENSe:CORRection:FULLrange:THRU[:EXECUTE]

:SENSe:CORRection:USERrange:LOAD[:EXECUTE]

:SENSe:CORRection:USERrange:OPEN[:EXECUTE]

:SENSe:CORRection:USERrange:SHORt[:EXECUTE]

:SENSe:CORRection:USERrange:THRU[:EXECUTE]

ExecuteOpen() (Impedance)

ExecuteOpen() (Mulimode)