:SENSe:CORRection:FULLrange:EXTPolated

Description

Gets a value indicating whether the actual full range calibration is extrapolated or not. If the calibration is extrapolated, that means that some values (especially at low frequencies) may not be accurate because the calibration was not performed at this frequency levels. It is extrapolated to this frequencies, but that is not a guarantee for best quality of measurement.

For more information about the calibration system please refer to Calibration.

Syntax Response
:SENSe<ch>:CORRection:FULLrange:EXTPolated? { 1 | 0 }
Parameters accepted format description
<ch> { 1 | empty } Currently only one channel is supported. Empty means 1 is used as default.
Response value description
{ 1 | 0 } Boolean value indicating whether the Full Range Calibration is extrapolated or not.

Options

Options Description
OFF | 0 Full Range Calibration is not extrapolated.
ON | 1 Full Range Calibration is extrapolated.

Presets

default value
{ 1 | 0 } 0

Sample usage

Perform a Full Range Gain Calibration and ensure that it is not extrapolated.

var visaSession = new TcpipSocket(VISA_RESOURCENAME);
visaSession.RawIO.Write(":CALC:PAR:DEF S21\n");
visaSession.RawIO.Write(":SENS:CORR:FULL:THRU\n");
visaSession.RawIO.Write("*WAI\n"); // wait for the calibration to finish
visaSession.RawIO.Write(":SENS:CORR:FULL:EXTP?\n");
visaSession.RawIO.ReadString();

:SENSe:CORRection:FULLrange:ACTive

:SENSe:CORRection:FULLrange:AVAIlable

:SENSe:CORRection:FULLrange:ENABle

:SENSe:CORRection:USERrange:ACTive

:SENSe:CORRection:USERrange:AVAIlable

:SENSe:CORRection:USERrange:ENABle

IsCalibrationExtrapolated (Gain)

IsCalibrationExtrapolated (Impedance)

IsCalibrationExtrapolated (Mulimode)